E36 M3 test vehicle on dyno

Keeping The E36 Cool, Part 2: Second Prototype

Interested in picking up our E36 fan shroud? Check out the full details on this kit on our product page!

Mishimoto BMW E36 Performance Fan Shroud Kit!

 

E36 M3 on dyno
E36 M3 on dyno

First Prototype Testing

When we left off last time we were exploring our first prototype design. This unit is a traditional aluminum fan shroud with air flaps to improve core airflow at speed. Once we had a working prototype, we decided to perform some idle testing to see how well our single electric fan would perform on a mostly stock E36 M3.

To get started, we began removing the stock setup.

Stock E36 M3 engine bay
Stock E36 M3 engine bay

Next, we installed the Mishimoto prototype along with our temperature sensors for data collection.

Fan shroud prototype installed
Fan shroud prototype installed
Fan shroud prototype installed
Fan shroud prototype installed

Our goal with this particular testing was to ensure that our fan could control and properly regulate idle temperatures for an extended time. We positioned the vehicle on the dyno, adjusted the fan controller, and kept an eye on the gauges.

Fan shroud prototype testing
Fan shroud prototype testing

We recorded inlet and outlet temperatures to see how quickly and effectively our fan setup reduced temperatures. After a lengthy test, we were pleased with the results. At this point, we still wanted to test the impact of our airflaps during speed driving. However, we ended up taking a different route for this project.

Second Prototype

This project was progressing toward the end of testing our electric fan setup for the E46 M3, which is shown below.

Mishimoto E46 M3 fan and fan-mount system
Mishimoto E46 M3 fan and fan-mount system

We found that this system provided a great amount of airflow during driving speeds. Additionally, our electric fan easily cooled the S54 at idle conditions, even in extreme environments. . We decided to give this design a try for our E36 electric fan setup.

With this new direction, we put a design into a 3D model and quickly fabricated a mount.

Second prototype fabrication
Second prototype fabrication
Second prototype fabrication
Second prototype fabrication

We mounted our electric fan and attached the entire assembly to our new E36 radiator.

Second prototype with fan
Second prototype with fan
Second prototype with fan installed on radiator
Second prototype with fan installed on radiator

The oddly shaped portion of the passenger side of the mount is a reservoir mounting system that will function with the stock reservoir. As mentioned earlier, we are also working on an aluminum replacement reservoir. Check out the progress of that project here: http://engineering.mishimoto.com/category/bmw-e36-coolant-expansion-tank-1992-1999/.

Once again we conducted our idle testing and ended up with similar results. Yes, it is extremely likely that this fan will provide greater efficiency with the use of an enclosed shroud. That said, our idle tests showed that this new shroud performed similarly, having no issues with controlling temperatures, even for an extended period of time. This shroud offers much greater airflow through the core at speeds in which improved cooling is needed, such as repeated high-rpm driving.

Dyno Testing

E36 M3 on dyno
E36 M3 on dyno

With this in mind, it was time for some more exciting tests. We wanted to see what kind of power gains, if any, we could achieve by removing the stock mechanical unit.

http://youtu.be/KkG1bKrdYUA

Our results are shown below!

E36 M3 dyno plot
E36 M3 dyno plot

Output is similar for most of the pull, however from around 55 mph to 71 mph we see some slight gains. These gains are shown a bit more clearly in the scaled plot below.

E36 M3 dyno plot at higher speeds
E36 M3 dyno plot at higher speeds

These plots show the power output both with and without the mechanical fan installed.  A slight increase occurs from around 55–70 mph to the tune of 1–3 whp. This isn’t the 5 whp we saw from the E46, but every little bit certainly helps.

What’s Next?

Now that we have positive results from our testing, we could move forward with designing this component in 3D. Check back with us next time for a look at our 3D model and actual prototype!

Thanks!

–John

Interested in picking up our E36 fan shroud? Check out the full details on this kit on our product page!

Mishimoto BMW E36 Performance Fan Shroud Kit!

 

Leave a Reply

Your email address will not be published. Required fields are marked *