Fan-mount prototype installed

Keeping The E36 Cool, Part 3: Final Prototype

Interested in picking up our E36 fan shroud? Check out the full details on this kit on our product page!

Mishimoto BMW E36 Performance Fan Shroud Kit!

Our final prototype is complete and looks fantastic. The fan mount is constructed from 1/8” steel that has been cut to a specific shape allowing for additional airflow through the radiator core at speed. Additionally, the mount is powder coated black to provide a durable finish. As noted in our last post, we tested this unit extensively with our 16” fan to ensure that coolant temperatures were properly regulated during both idle and all driving conditions.

Check out a few shots of the mount!

Final prototype of fan mount
Final prototype of fan mount
Final prototype of fan mount
Final prototype of fan mount

This shroud has been designed to function with the stock expansion tank as well as the aluminum expansion tank we have been working to develop. Check out the mounting system our engineering team designed to secure the tank properly in the stock location.

Final prototype of expansion tank mount
Final prototype of expansion tank mount

Test Fitting

After inspecting our final prototype, it was time to pop this piece into the car and ensure that all our mounting points were correct. We also modified the fan location slightly and checked clearance with the fan pulley.

First, a fan-less engine bay with our E36 X-line radiator installed. This radiator is quite massive and should provide a worst-case situation in terms of evaluating fitment.

Mishimoto E36 X-line radiator installed
Mishimoto E36 X-line radiator installed
Mishimoto E36 X-line radiator installed
Mishimoto E36 X-line radiator installed

Next we installed our prototype fan mount and fan.

Fan mount prototype installed
Fan mount prototype installed

Here’s a shot of our drawing next to the installed component!

Fan-mount prototype installed
Fan-mount prototype installed
Fan-mount prototype installed
Fan-mount prototype installed

Fan pulley clearance was more than acceptable with the adjustments we made to fan placement. Check out a few shots depicting the space with our X-line radiator.

Fan-mount prototype clearance
Fan-mount prototype clearance
Fan-mount prototype clearance
Fan-mount prototype clearance

Shroud and Prototype Expansion Tank

As noted earlier, we are also developing an expansion tank for the E36. Check out a shot of our prototype component mated to our final shroud design!

Fan-mount prototype with expansion tank prototype
Fan-mount prototype with expansion tank prototype
Expansion tank mount
Expansion tank mount

More images will be available within the expansion tank thread we have here on the forums.

Wiring Details

Wiring an electric fan may seem like a daunting task, but our kit includes all necessary wiring and components to make this a cake-walk. Our team is also working to finalize an installation guide that provides in-depth details for install. Below is a shot of the wiring kit for our E46 setup, which is very similar.

 

Wiring pack example

 

Included within our wiring kit for the E36 are the following items:

(1) Inline fuse holder

(2) Butt splices

(2) 0.25” Wide quick-disconnect terminals

(2) 3/8” Stud size ring terminals

(1) 3/8” Black wire cover, 5’ length

(1) 3/16” Black shrink wrap, 6” length

(1) 1/4” Black shrink wrap, 2” length

(3) 7.5” Black zip ties

All these components will provide a clean, factory-appearing installation. Power will come from a fuse adapter that will plug directly into the factory fuse panel. From there, some simple wiring work is needed for the controller, the temperature-sending unit, and the fan itself.

Final Kit

With positive testing complete and perfect fitment demonstrated by our prototype unit, we are now prepared to begin manufacturing these kits. So what will the full kit include?

  • Mishimoto powder-coated fan mount
  • Mishimoto 16” electric fan
  • Mishimoto fan controller with 1/8” NPT or temperature sensor probe
  • Mishimoto BMW E36 wiring kit for electric fan (individual items referenced above)

This kit will be offered with either a 1/8” NPT temperature sensor or a probe-style sensor. The 1/8” NPT is for vehicles with an existing 1/8” port. The Mishimoto E36 X-line radiator includes a tank-mounted port of this size. This sensor would then thread into the port to acquire temperature data. For those utilizing a stock radiator, the probe sensor can be used, and it fits within the fins of the radiator. Both sensor styles have proven to be very accurate during testing.

Our team is putting together a detailed installation guide that highlights the fan mount install as well as the wiring details. The Mishimoto electric fan conversion kit is a bolt-on upgrade for the stock clutch fan, providing a reduction in engine rotational mass along with efficient, reliable cooling during all driving conditions.

Feel free to follow up with any questions or comments!

-John

Interested in picking up our E36 fan shroud? Check out the full details on this kit on our product page!

Mishimoto BMW E36 Performance Fan Shroud Kit!

 

One thought on “Keeping The E36 Cool, Part 3: Final Prototype”

  1. Eben will you have a proper wireing diagram for the wiring kit on the e36 or should i make one for you if so will u emaill me a diagram of what wire dose what please

Leave a Reply

Your email address will not be published. Required fields are marked *